The LINK indicator (blue LED) on the subwoofer is turned on. Plug the power cords of the main unit and subwoofer into an AC wall outlet. The main unit and the subwoofer are now linked (connected). press MUTE on the remote control for 5 seconds. The main unit and the subwoofer are now linked (connected). While the main unit is powered off (STANDBY mode). You can enjoy better sound from the wireless subwoofer by, selecting the sound effect. If the main unit is powered off, the wireless subwoofer will be in the standby mode and theSTANDBY LED on the upper side will come on after the LINK indicator (Blue LED) blinks for 30 seconds. If the LINK indicator does not light when the main unit and subwoofer are turned on, please set the ID by following the procedure below. The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect, wirelessly) automatically when the main unit is turned on. 20122022, manualsdir.comAll rights reserved. Plug the power cords of the main unit and subwoofer into an AC wall outlet. To finalize the link, turn the main units power on while the. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds. (See page 20), Before moving or installing the product, be sure to turn off the power and disconnect the power, If the main unit is powered off, the wireless subwoofer will be in the standby mode and the, STANDBY LED on the upper side will come on after the LINK indicator (Blue LED) blinks for 30, If you use a device that uses the same frequency (2.4GHz) near the system, interference may. (See page 20). the wireless signal cannot penetrate metal. The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit is turned on. 5. If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the. If you use a device that uses the same frequency (2.4GHz) near the system, interference may cause some sound interruption. Keep the unit away from water and moisture. 5. 2. The LINK indicator (blue LED) on the subwoofer is turned on. The transmission distance of the wireless signal between the main unit and subwoofer is about 33 ft., but may vary depending on your operating environment. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. press MUTE on the remote control for 5 seconds. 2. The ID SET message appears on the main units OLED display. The ID SET message appears on the main unit's OLED display. You can enjoy better sound from the wireless subwoofer by selecting the sound effect. 3. Keep the unit away from, For optimal listening performance, make sure that the area around the wireless subwoofer, Crystal surround air track (active speaker system) (25 pages), Manual will be automatically added to "My Manuals", Speaker System Samsung Crystal Surround Air Track HW-F551 User Manual, Speaker System Samsung HW-F550 User Manual, Speaker System Samsung HW-F450 User Manual, Speaker System Samsung Crystal Surround Air Track HW-F450 User Manual, Speaker System Samsung HW-F750 User Manual, Speaker System Samsung Crystal Surround Air Track HW-F750 User Manual, HW-JM45C Connecting The Wireless Subwoofer, HW-H750 Connecting The Wireless Subwoofer, HW-F750 Connecting The Wireless Subwoofer, HW-H7500 Connecting The Wireless Subwoofer, Crystal Surround Air Track Connecting The Wireless Subwoofer, HW-C450 Connecting The Wireless Subwoofer, HW-C451 Connecting The Wireless Subwoofer, HW-F550 Connecting The Wireless Subwoofer, HW-H550 Connecting The Wireless Subwoofer, HW-F450 Connecting The Wireless Subwoofer, HW-H450 Connecting The Wireless Subwoofer. connection between the main unit and wireless subwoofer. The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly. For optimal listening performance, make sure that the area around the wireless subwoofer location is clear of any obstructions. If the LinK indicator does not light when the main. The wireless receiving antenna is built into the wireless subwoofer. 3. 1. If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the connection between the main unit and wireless subwoofer. 4. 4. The stanDBy indicator is turned off and the LinK indicator (Blue LED) blinks quickly. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds. 1. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal cannot penetrate metal. To finalize the link, turn the main unit's power on while the. If a steel-concrete or metallic wall is, between the main unit and the wireless subwoofer, the system may not operate at all, because. While the main unit is powered off (STANDBY mode). The transmission distance of the wireless signal between the main unit and sub is about 33 ft., but may vary depending on your operating environment. The wireless receiving antenna is built into the wireless subwoofer. unit and subwoofer are turned on, please set the ID by following the procedure below.
404 Not Found | Kamis Splash Demo Site

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.